9 Best 3D Printers under 300 in 2021- Buyer’s Guide
If you want to purchase the best 3D printers under 300 and searching for some help, then you are exactly on the right track. We are going to help you purchase your printer through our guide and tricks.
Before making any guide we go through detailed research and undergo all the necessary aspects of those products and then draw a list of products to give you variety and let you choose the product of your choice from them.
It’s very obvious that everyone can get the best product from the market if he has a bunch of money. The best thing is to get the product of your choice within a limited money budget.
We’ve got some of the best 3D printers under 300 with all the required basic specifications and here you have it. BestTechz also provides top 3D printers under 500 list.
Table of Contents
Best 3D Printers under 300
1. Geeetech A10M
This printer comes in the mostly pre-assembled form. You just need 10 minutes to assemble and start printing. This is the best choice if you dislike the noise of the printing process. Printing starts from the very last print if the electricity cuts off during the printing process.
This printer comes in an 80% assembled form. It takes just 10 minutes to fully install and start working.
There is an advantage of having an open-source control board. It helps you to adjust your printers and modify the firmware according to your will.
This 3D printer comes in both single and double extruding functionalities. There is a bit of difference in the price of both printers.
If the electricity cuts off during the printing process, it starts printing again from the very last print.
This printer has a High adhesion building platform which makes printing very much easier for you.
There are V-shaped wheels and V-slot rails on each axis that control the noise and gives you quieter printing.
You don’t need any masking tape and glue stick for printing.
This printer gives you a noise-free printing experience.
This printer gives power failure protection. In case if the electricity cuts off, you don’t need to start printing from the first.
It has an open design structure and can be a bit dangerous to use in front of children.
2. ANYCUBIC Mega-S
We can assure you it is one of the best 3D printers on Amazon with an extremely low budget. This surety comes from Amazon itself for this printer as they have placed it in Amazon’s choice category. One good thing about is that has filament run-out detection. You are notified by a beep of alarm to change the filament in case if it expires.
This 3D printer is from Amazon’s choice category which ensures that it is one of the best 3D printers on Amazon.
It is available in 2 models Mega S and Mega S. There is a little bit of price and specifications difference between these two printers.
There are only 3 steps to install it completely before starting working. There come 8 screws and 3 cables with it to install with. It takes a few minutes to install it completely.
Upgraded Titan extruders are used in this printer to maintain the temperature of the printer and it is compatible with all the filament materials.
The good thing about this printer is that it gives you filament expiring notification, When the filament runs out of condition its alarm beeps tp notify you to change the filament.
It comes with a touch screen LCD display to manage the printing settings.
This 3D printer has filament run-out detection. You will be notified if the filament runs out.
It comes with lifetime technical support and customer care service.
This printer has a certificated of being one of the best 3D printers by Amazon.
The materials used in its construction are plastic and aluminum.
3. Longer3D LK4
This 3D printer is the best choice for you if you are a beginner. It is very easy to operate and available at a very low price rate. There are 2 screen sizes available in this printer model. You can select any screen of your choice and the price will alter accordingly.
This 3D printer is also from Amazon’s choice category. Belonging to Amazon’s choice category is like having a certificate of being one of the best products on Amazon.
The complicated parts of this printer are already assembled before shipping it. After arrival, it takes your few minutes to fully assemble and start working.
It comes in 2 sizes of touch screens to manage the print settings. It is available on a 2.8 and 4.3 inches touch screen. The prices of printers vary with the sizes of the touch screen displays.
It is the best choice for beginners as it is very easy to operate and available at a very low price.
This 3D printer does feature a filament expiring detection. The printer notifies you to change the filament when it goes out of condition.
It is designed by keeping the safety aspect in mind. The power is placed under the heat bed to make it safer.
This printer comes with 12 months money-back warranty which is available in very few of the best 3D printers under 50.
This is from Amazon’s choice category. This specification is always given priority.
It is available in 2 sizes of touch screens to give you a choice of selection.
The printing process starts from the very last print if power cuts off.
It comes with a one-year money-back warranty.
The best quality aluminum is not used in this printer like the other ones.
4. Creality Ender 3 Pro
Creality Ender 3 Pro is a very budget-friendly 3D printer. If you are searching for a 3D printer with a limited budget then it can be a good choice. It has space to be upgraded. If you need more features in the future then it has space for them. I save your power, needs a few minutes to heat up and you can start printing. If you are not satisfied with its working or it has any fault then you have the option to return it back.
Another one of the printers, another verification to be the best from Amazon, another printer from Amazon’s choice category.
This 3D printer has UL certifies power supply. This supply printer from unexpected power surges protects the printer from unexpected power surges.
If the power supply drops off during the printing process, you don’t need to start printing from the very first print. It starts from the most recent print.
It does not take much to heat up. It only needs 5 minutes and you can start printing.
This printer has a very high precision for printing. The y-axis mounting groove and stable structure make the printing more accurate and precise.
It comes with a returnable warranty. If you are not satisfied or the printer has some fault, you are free to return it back.
It’s a very budget-friendly printer.
It has space to be upgraded. If you want to upgrade in the future you can do it easily.
It has a returnable warranty in case you are not satisfied with the product.
It takes with short time to heat up. You can start printing very quickly.
It is not safe to be used in front of children because of its open structure.
5. ELEGOO Mars UV Photocuring
This printer is very safe to be used in front of children as it is totally covered from all sides. This printer comes with a money-back warranty of one year. If you face any issue regarding this printer you are absolutely free to contact the company. There are no extra shipping charges for this printer.
This 3D printer comes with free of cost fast slicing software. It can slice up to 30 MBs in just one minute.
With the help of this printer, you can hollow out the model before slicing which helps you to save your resin dramatically during the photocuring process.
It comes with a 3.5 inches touch screen display to manage the printing settings. There is a feature of offline printing as well in this printer.
It comes in different assembled parts. It takes a few minutes to start printing after unboxing it.
This 3D printer comes with a one-year money-back warranty.
It comes in some assembled parts and takes a few minutes to start working after unboxing.
There is a 3.5 inch LCD touch screen in this printer to set the print settings manually.
There are no extra shipping charges for this printer.
The LCD screen used in this printer is a bit smaller in size.
6. LABISTS Mini Desktop 3D Printer
This is one and the only printer of best 3D printers under 300 which is designed for beginners and especially for children. It is very easy and safe to use. Very energy-saving and works at just a 30W power supply. It reaches its printing temperature in just three minutes. If you don’t like noise, it is a perfect choice for you.
This 3D printer is best for beginners. Can be a good choice for children.
The printing dimensions of this printer are 100x100x100 mm with 1.75 mm filament which has 0.05mm accuracy.
The printer works at 180℃ temperature and it reaches its maximum temperature in just 3 minutes.
It is very safe to use even for kids and energy saving. It works at the 30W power supply.
This printer comes in 3 different assembled parts and takes only 5 minutes to start printing after assembling.
It gives a silent printing facility. Do not make any noise while printing.
It is very easy and safe to use.
Very energy-saving and works at a low power supply.
It reaches its printing temperature in just 3 minutes.
Very much suitable for you if you don’t like printing noise.
This printer is made of plastic material.
You can have a record of prints taken through a micro SD card in this printer. You don’t need to start printing from the first print in case of a power cut off during the printing process. It is a noise-free and durable 3D printer. You don’t need to worry about the printer as it is strictly tested before shipping.
This is very easy to assemble. It comes in several pre-assembled parts.
It starts printing from the very last print if the power cuts off during the printing process.
An upgraded extruder is used in this printer. It decreases the bad extrusion and it makes it more smooth, noiseless, and durable.
It is very easy to use and set the printing. There is an assassinated bed leveling in this 3D printer.
There comes a micro SD card with this printer to keep a record of prints taken.
All the components are strictly tested before shipping. So you don’t need to worry about products. It does possess lifetime technical support from the company.
It is very easy to assemble. You just need to connect the pre-assembled parts which take a few minutes.
There is a micro SD card to keep a record of prints taken.
There is used an upgraded extruder in this printer to make it smoother, noise-free, and durable.
There is lifetime technical support with this printer from the company.
The bed leveling in this printer is not automatic.
8. GEEETECH A10M
This is the only color printer in the whole list of printers. This printer has a dual extruder module which helps it to give a better printing experience. When the filament gets out of condition, there is an alarm that beeps and notifies you to change the filament.
This is the only colored 3D printer from the list of best 3D printers under 300.
This 3D printer has a dual extruder module which gives you customized color printing.
This printer features filament expiry detection. When the filament runs out, it notifies you to change it.
There is a break resuming feature as well. It comes in a 90% pre-assembled form. You just need to connect these parts and you can start printing.
It has a large printing area. The printing bed of this printer has 220*220*260mm dimensions.
It comes with lifetime technical support to ensure a better working experience for you.
It has a large printing area.
This is the only color printer in the whole list of best 3D printers under 300.
It comes with lifetime technical support.
It has a dual extruder to give you better printing performance.
This printer takes a bit more time to heat up and start printing.
9. Creality Ender 3
The safety measures are kept in mind while designing it. The power supply is placed under the heating bed to keep it safe. The heating temperature of this printer is 110℃ and it takes only 5 minutes to reach it. There is used dual extruder module to gives good printing performance.
This printer has safety protected power supply. The power supply is placed under the heating bed to keep it safer.
It has the ability to resume printing if the supply breaks down during the printing process.
It takes a bit more time to assemble this printer. It takes 2 hours to assemble it completely and start printing.
The printing temperature of this printer is 110℃ and takes only 5 minutes to reach its printing temperature.
You don’t need to worry about its quality. It is tested several times before dispatching it to you.
It has a dual extruder module which gives smoother, noise-free, and efficient printing.
It possesses a good size heating bed. The dimensions of the heating area are 220x220x250mm.
It takes only 5 minutes to reach its printing temperature.
It is tested several times before shipping it.
It has a dual extruder module to get noise-free and effective printing.
The heating bed has a large size.
It takes a bit more to assemble it as compared to the rest of the printers.